Chimney Inspection in Albany, NY | Chimney Sweep Albany

Chimney Inspection in Albany - Flat-Price Sweep, Findings in Writing

A flat-price sweep with a camera inspection and photo report included. If we find something that needs attention, you see the picture before you hear a price - and we will tell you when it can wait.

Flat price quoted before we book

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Masonry repairMasonry repair
Gas fireplace serviceGas fireplace service
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate

Trusted Chimney Inspection for Albany Homeowners

A chimney looks fine from the sidewalk right up until the first cold night, when smoke backs into the living room or you smell something acrid behind the fireplace. An inspection finds those problems before they cost you a liner or a ceiling. Our technicians, with up to experience, check the flue, firebox, damper, cap and crown, and they show you the camera footage rather than just telling you what you need. We inspect first and recommend honestly. Same-day appointments are often available in Albany, and a written estimate sets the price before any work starts. Call (866) 650-9028 to book. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Call (866) 650-9028

Fireplace Inspection

Fireplace Inspection covers the firebox, damper, smoke chamber and the first stretch of flue, which is where most wood-burning problems start. You need one when you’ve just bought an older Albany home, when the fireplace has sat unused for a few seasons, or when smoke has started drifting into the room instead of up the flue. A fireplace inspection in Albany typically runs $125-$250 depending on how much of the system gets checked and whether a camera goes in. We include a camera view of the smoke chamber and a photo report, and we work with HeatShield liner resurfacing when the flue behind the firebox has started to break down. A typical fireplace inspection runs $125-$250, and the written estimate sets the final price.

Firebox and Damper Check

We look for cracked firebrick, gaps in the mortar joints, and a damper that no longer seals flat. A damper that won’t close lets warm house air escape up the flue all winter, which shows up on your heating bill long before you notice anything at the hearth.

Smoke Chamber and Smoke Test

A smoke test shows whether the fireplace actually drafts under real conditions rather than just looking correct. We run a small smoke source at the firebox and watch how it travels. If it curls back into the room, the problem is usually the smoke chamber shape or a flue that’s too small for the opening.

Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service

Chimney Inspection Services

Chimney Inspection Services cover the whole structure, from the firebox to the crown, including the exterior masonry and the cap. You need them when you’re buying or selling a house, after a chimney fire, after a storm has knocked something loose on the roof, or simply on a yearly rhythm before burning season. We check the flue interior, the masonry joints, the cap and spark arrestor, and the flashing where the chimney meets the roof. Chimney inspection services in Albany typically run $125-$400 depending on whether you need a basic visual check or a full video-assisted assessment. Every inspection comes with photos you keep, and we tell you plainly which items can safely wait a season. One call covers inspection, sweep and repair, so you don’t get handed off to a second contractor. For the full picture, see chimney sweep albany.

Interior and Exterior Assessment

The interior check covers the flue lining, the smoke chamber and the damper, and the exterior covers the brickwork, mortar, crown and flashing. Both matter, because a chimney can look solid inside and still be taking on water through a hairline crack above the roofline.

Interior and Exterior Assessment

What the Written Report Includes

Your report lists what we found, photos of anything that concerns us, and a plain-language note on which items are urgent and which aren’t. Nothing gets recommended without evidence you can look at yourself.

What the Written Report Includes
Need help today?Fast, friendly service and a no-obligation free estimate.

Call (866) 650-9028

Chimney Flue Inspection

Chimney Flue Inspection focuses on the liner itself: the clay tiles or stainless system that carries smoke and gases out of the house. You need one when you’ve had a chimney fire, when creosote has built up heavily, when you’re switching from wood to a gas insert, or when a new appliance is going in that changes how much heat the flue has to handle. We run a camera down the flue and check for cracked tiles, gaps at the joints, and gaps between the liner and the surrounding masonry. A flue inspection in Albany typically runs $150-$350 depending on access and whether the flue needs cleaning first. Where the liner is worn but hasn’t failed, HeatShield’s ceramic resurfacing system can restore it without a full tear-out. A typical flue inspection runs $150-$350, and only the written estimate sets the final price.

Clay Tile and Joint Checks

Older Albany flues are usually lined with clay tiles stacked with mortar joints, and those joints are the first thing to go. A gap of even a fraction of an inch lets heat and gases reach the wood framing behind the chimney.

When Resurfacing Beats Replacement

If the tiles are intact but the joints are eroded, resurfacing with HeatShield can rebuild the liner face from the inside. If the tiles are cracked through or missing, a new DuraFlex stainless liner is the safer path, and we’ll show you the footage either way.

Chimney Fire

Chimney Fire damage is often invisible from the room, which is why an inspection after one matters even if the fireplace still works. A chimney fire happens when creosote in the flue ignites, and it can burn hot enough to crack tiles, warp a damper or damage the chimney’s framing without breaking anything you can see. You need an inspection right away if you heard a low roar from the chimney, saw flames or sparks at the top, smelled a strong burning odor, or found dark creosote flakes on the roof or ground. We inspect the flue with a camera, check the masonry for heat damage, and tell you whether the chimney is safe to use again. Post-fire inspections in Albany typically run $150-$350. Where damage is found, repair runs from spot fixes up to a full reline. Please don’t start another fire until the flue has been inspected. Call (866) 650-9028. We answer 24/7.

What a Chimney Fire Leaves Behind

The visible damage is the least of it. Cracks in the tiles and heat damage to the mortar joints behind them are the items that make a chimney unsafe, and they only show up on camera or with a close look at the masonry.

Safe Use After a Fire

Until the flue has been checked, treat the fireplace as out of service. Once we’ve inspected it, you’ll get a clear answer: safe to use, safe with a specific repair first, or out of service until repaired.

Level 2 Chimney Inspection

Level 2 Chimney Inspection is the step up from a basic visual check: it adds a video camera scan of the flue and a closer look at the parts of the chimney you can’t see from the hearth or the driveway. You need one when a property is changing hands, after a chimney fire or earthquake, when you’ve changed the appliance or fuel type, or when the flue is suspected of having an obstruction. We inspect accessible areas including the attic, crawlspace and roofline, run the camera down the flue, and document what we find in a written report. A level 2 chimney inspection in Albany typically runs $250-$400. If you’re buying a home in Albany or nearby, this is the inspection your lender and your insurer are most likely to want to see. A typical level 2 inspection runs $250-$400, and the written estimate sets the final price.

Camera and Access Points

We use a camera down the full length of the flue, and we check the attic and crawlspace where the chimney passes through the framing. Those hidden sections often hold the answer when a chimney looks fine from the top and leaks inside the house.

Buying or Selling a Home

A level 2 report gives a buyer concrete evidence rather than a seller’s assurance. If the report finds a repair needed, the written estimate that comes with it gives both sides a real number to negotiate around.

Chimney Leak

Chimney Leak problems usually start above the roof, not in the flue, and water finds its way in through the crown, the flashing or the mortar. You need an inspection when you see brown staining on the ceiling near the chimney, dark damp patches on the brick, white mineral bloom on the masonry, or rust on the damper. Our inspections look at the crown for cracks, the flashing where the chimney meets the roof, the brick and mortar joints, and the cap, and we check whether water is coming down the flue or running behind the masonry. Leak inspections in Albany typically run $150-$300, and most leaks are fixed with a crown repair, fresh flashing or a new cap. A Copperfield or Famco cap usually solves the simplest case: an open flue taking rain straight down. A typical leak inspection runs $150-$300, and only the written estimate sets the final price.

Reading Water Stains and Rust

Where the stain appears tells you a lot. A ceiling stain near the chimney usually points to the flashing or the crown, while rust on the damper is more often water coming down the inside of the flue.

Flashing, Crown and Mortar

Flashing is the metal seal where the roof meets the chimney, and it’s the most common leak point on any home. The crown, the sloped concrete cap on top, cracks as it ages, and water runs down into the masonry from there.

Chimney Camera Inspection

Chimney Camera Inspection is a video scan of the inside of the flue, and it’s the tool that turns a guess into a diagnosis. You need one whenever the flue can’t be checked visually, which is most of the time, and it’s standard in a level 2 inspection and after any suspected chimney fire. We run a camera the full length of the flue, record what it sees, and play it back for you so you can see the cracks, gaps or creosote glazing for yourself. Camera inspections in Albany typically run $150-$300, and the footage is yours to keep. It’s the honest answer when you’ve been told you need thousands of dollars of liner work and want evidence first. A typical camera inspection runs $150-$300, and the written estimate sets the final price.

Seeing What a Visual Check Misses

A flue that looks clean from the top can hide cracked tiles and open joints partway down. The camera shows the actual condition of the liner rather than the reporter’s opinion of it.

Verifying a Second Opinion

If a contractor has already told you the flue needs a full replacement, the footage gives you a second set of eyes. We show what we see and tell you when the work can safely wait.

Brands We Service

We work with professional-grade chimney materials rather than hardware-store substitutes. That includes DuraFlex flexible liners, which we install on older or irregular flue configurations where a rigid liner won’t fit, and HeatShield, the ceramic resurfacing system we use to restore a deteriorating flue liner without a full replacement. Both are trade-level products, and knowing how they behave in Albany’s older chimneys is most of the job.

On the hardware side, we use Famco and Copperfield components for caps, dampers and venting, so the top of the chimney is as sound as the inside. Whether your chimney has an older clay liner, a stainless system, or brand hardware someone before us installed, our inspection documents exactly what’s there. The same team that inspects a problem is the team that repairs it, so you’re not handed a report and a list of contractors. And whether you have DuraFlex, HeatShield, Famco, Copperfield or any other make, we can help.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Signs You Need a Pro Right Now

  • Smoke rolling back into the room. A fireplace that used to draft well and now doesn’t is usually telling you about an obstruction or a change in the flue. It’s uncomfortable, and it can also push carbon monoxide back into the house.
  • Dark stains on the ceiling or chimney. Brown or grey staining near the chimney means water or creosote is getting somewhere it shouldn’t. Stains spread slowly at first and then quickly, and the earlier we look, the smaller the repair.
  • A strong acrid smell when the heat comes on. That smell is often creosote or debris, and it gets stronger as the chimney warms and the air pressure changes. It’s a sign the flue needs a look before the next fire.
  • Visible cracks or crumbled mortar at the crown or brickwork. A cracked crown or missing mortar joints let water into the chimney structure every time it rains or freezes. Albany winters make that worse with repeated freeze-thaw cycles.
  • You’ve just bought the house or changed appliances. A fireplace or wood stove you haven’t personally used is an unknown, and a level 2 inspection is the way to start safe rather than guess.

Our Process, Step by Step

  1. 1
    Ask you what you’ve noticed. We start with your description: how the fireplace behaves, when it smells, where you see stains. That shapes where the inspection focuses and saves time on the roof and in the attic.
  2. 2
    Inspect the interior. We check the firebox, damper, smoke chamber and the first stretch of flue, and we look at the framing at the attic and crawlspace where the chimney passes through.
  3. 3
    Run the camera down the flue. A video scan shows the liner from end to end and catches cracked tiles, open joints and heavy creosote that a visual check from the top can miss. We record it so you can watch later.
  4. 4
    Check the exterior. The camera doesn’t show the crown, flashing or cap, so we check those from the roof, along with the masonry and mortar.
  5. 5
    Walk you through the report. We show you the footage, explain what we found, and separate what needs attention now from what can wait. Nothing is recommended without evidence you can see, and the written estimate covers any repair before work begins.

How Much Does Chimney Inspection Cost in Albany?

A typical chimney inspection in Albany runs $125-$250 for a basic visual check of the fireplace and accessible flue, $250-$400 for a level 2 inspection with a full camera scan, and $150-$300 for a targeted camera inspection or leak assessment. Post-fire inspections usually fall in the $150-$350 range, and a full flue inspection with cleaning before it runs $150-$350. These are estimated ranges, and the written estimate sets the final price.

What moves the price is the level of inspection, whether the flue needs cleaning first to see the liner clearly, how much roof access the chimney requires, and whether the home has more than one flue or appliance. A basic check on a straightforward fireplace costs less than a level 2 with attic and crawlspace access.

The way to avoid overpaying is to ask for the camera evidence before agreeing to any repair. If a contractor can’t show you the crack or gap, you can’t judge whether the repair is needed. Our inspections include the footage and a photo report, and we say plainly when work can safely wait a season. Nothing is recommended without evidence you can see for yourself.

A free estimate is the starting point: you get the inspection findings, the likely repair cost, and a straight answer on urgency before any commitment. Call (866) 650-9028 for an exact quote. Estimates are free.

Our Service Area Near Albany

We inspect chimneys across Albany and the surrounding towns, including Albany, Loudonville, Menands, Westmere, Colonie, Rensselaer, East Greenbush, Latham, Watervliet, Hampton Manor, Roessleville and Voorheesville. Homes in these areas share a lot of the same chimney problems: older clay flues, cape-style chimneys with short runs, and crowns that have taken decades of freeze-thaw. Most inspections can be scheduled within a day or two, and same-day slots often open up. Call (866) 650-9028 to check availability for your street.

Serving Albany, NY – Our Local Coverage Area

We serve Albany and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

Frequently Asked Questions About Chimney Inspection in Albany

Schedule Your Chimney Inspection Service in Albany Today

Don’t wait for the first cold night to find out your chimney isn’t ready. Book a chimney inspection in Albany and get the camera evidence, the photo report and a straight answer on what needs doing and what can wait. Our technicians have up to experience, and the estimate is free with no obligation. Call (866) 650-9028. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Written by the team at Chimney Sweep Albany.

Why Albany Chooses Chimney Sweep Albany

We set the standard for chimney inspection in Albany.

Evidence Before Recommendations

Every sweep includes a camera inspection and a photo report. If we find something, you see it before we quote it - no repair is ever recommended on our word alone.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Albany

Getting your chimney inspection handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your chimney inspection needs and we provide an upfront, transparent quote with no obligation and no hidden fees.

2

We Book a Time That Works for You

A background-checked, certified technician arrives at the time we agree on.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local chimney inspection pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Albany Customers Say

Trusted by homeowners across Albany and surrounding areas.

★★★★★

"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."

Sarah Gallagher
★★★★★

"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."

Bethany Anderson
★★★★★

"Older house, weird setup, previous owner did some creative things. He didn't sigh or roll his eyes, he just figured it out. Took him a while but he got there."

Andre Hampton

Ready for Chimney Inspection in Albany?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast help in Albany.

(866) 650-9028

Request a Free Estimate in Albany

Tell us about your chimney inspection needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Local Service Coverage
Call Now - We Answer 24/7